Hewitt, Christopher David (2016). Powder build-up in detergent packing lines. University of Birmingham. Eng.D.
Preview |
Hewitt16EngD.pdf
PDF - Accepted Version Download (8MB) |
Abstract
Build-up is a fouling process in which a small fraction of a powder becomes a film adhered to a surface. Specifically buildup in auger fillers which is the focus of this thesis is a significant problem for industry leading to equipment downtime for cleaning, drives tripping due to high torque and reduced powder quality.
The work presented in this thesis shows that for a unblended powder with a particle size similar to that of the auger fillers auger/tube clearance, build-up will be formed when powders have b-1 Kawakita parameter of less than 0.5 MPa and tablet strengths below 0.6 MPa post compression to 58 MPa.
It is proposed based upon results the work of Crutchley and Bridgewater [29] and Calvert et al. [30] that powders which form build-up due so due to the stresses they experience as they pass through the auger/tube clearance. Additionally this stress is a function of the ratio of the powder’s particle size to the magnitude of the auger/tube clearance C. Work presented in Chapter 8 supports this conclusion showing that once C/D90 is greater than 3.5, build-up is not formed.
| Type of Work: | Thesis (Doctorates > Eng.D.) |
|---|---|
| Award Type: | Doctorates > Eng.D. |
| Supervisor(s): | Supervisor(s) Email ORCID Ingram, Andy UNSPECIFIED UNSPECIFIED Smith, David UNSPECIFIED UNSPECIFIED |
| Licence: | |
| College/Faculty: | Colleges > College of Engineering & Physical Sciences |
| School or Department: | School of Chemical Engineering |
| Funders: | None/not applicable |
| Subjects: | T Technology > TP Chemical technology |
| URI: | https://bham-theses.eprints-hosting.org/id/eprint/6851 |
Actions
![]() |
Request a Correction |
![]() |
View Item |
Downloads
Downloads per month over past year
Tools
Tools
