Fennell, Daniel Alexander (2014). Exhaust gas fuel reforming for improved gasoline direct injection engine efficiency and emissions. University of Birmingham. Ph.D.
Preview |
Fennell14PhD.pdf
PDF - Accepted Version Download (7MB) |
Abstract
The thesis investigates how exhaust gas fuel reforming, also known as reformed exhaust gas recirculation (REGR), may benefit direct injection gasoline (GDI) engine efficiency and emissions. REGR is a thermochemical process that has potential for efficiently producing hydrogen-rich gas onboard a vehicle by using waste exhaust energy to promote endothermic reforming of hydrocarbon fuels. Partially fuelling a gasoline engine with hydrogen generally improves engine thermal efficiency.
The experimental research begins by simulating REGR on single- and multi-cylinder GDI engines, which indicates that REGR can increase engine thermal efficiency by up to 9% and reduce NOx by up to 96%. Particulate matter (PM) measurements reveal that REGR significantly reduces PM number and mass emissions, beyond that achieved by EGR.
Further experiments with a full-scale prototype exhaust gas fuel reformer integrated with the multi-cylinder GDI engine demonstrate improved fuel efficiency at a wide range of engine conditions, by 8% for conditions typical of motorway driving. The reforming process is observed to be overall endothermic when the exhaust temperature is above 650°C, and the reformed fuel enthalpy is increased by up to 21% in these experiments.
The results demonstrate that REGR can simultaneously increase engine thermal efficiency, and reduce gaseous and PM emissions.
| Type of Work: | Thesis (Doctorates > Ph.D.) |
|---|---|
| Award Type: | Doctorates > Ph.D. |
| Supervisor(s): | Supervisor(s) Email ORCID Tsolakis, Athanasios UNSPECIFIED UNSPECIFIED Dearn, Karl UNSPECIFIED UNSPECIFIED |
| Licence: | |
| College/Faculty: | Colleges > College of Engineering & Physical Sciences |
| School or Department: | School of Engineering, Department of Mechanical Engineering |
| Funders: | None/not applicable |
| Subjects: | T Technology > TJ Mechanical engineering and machinery |
| URI: | https://bham-theses.eprints-hosting.org/id/eprint/5439 |
Actions
![]() |
Request a Correction |
![]() |
View Item |
Downloads
Downloads per month over past year
Tools
Tools
