Awang Kechik, Mohd Mustafa (2011). Improvement of critical current density in YBa2Cu3O7-δ films with nano-inclusions. University of Birmingham. Ph.D.
Preview |
AwangKechik_11_PhD.pdf
Download (9MB) |
Abstract
A high critical current density Jc is crucial for the application of HTS YBa2Cu3O7-δ (YBCO) in the fabrication of energy efficient power devices and wires. We have prepared and studied YBCO films with nanoinclusions for increasing the current-carrying capability. All films were prepared by pulsed laser deposition (PLD) on single crystal SrTiO3 (STO) substrates at optimised condition parameters. We found that the substrate temperature Ts of 780° C, laser energy E ~ 218 mJ/pulses, distance between target and substrate Dt of about 55 mm, annealing oxygen pressure Oap 450 Torr and cooling rate Ct 8°/min were the optimum conditions for making good films with Tc = 91 K. We have used a method for introducing artificial pinning centers which has been shown to be successful in the nanotechnology of pinning centres: distributing a secondary phase, YBCO with 1% Gd2Ba4CuWOy (2411W) nano-inclusions, YBCO with 2% wt BaZrO3 (BZO) and YBCO with 4% wt BZO nano-crystalline particles in the film. The superconducting properties were determined by AC susceptibility, magnetisation loops and transport measurements using a Quantum Design Magnetic property measurement system (MPMS) and a Physical properties measurement system (PPMS). Scanning and transmission electron microscopy (SEM) and (TEM), Atomic force microscopy (AFM) and X-ray were also used to characterise the micro-structure of the films. Both 2411W and BZO nano-inclusions led to increased Jc in applied fields and self-field. Scaling of the flux pinning force based on the Dew-Hughes model has been used in this work for investigating the flux pinning mechanism.
| Type of Work: | Thesis (Doctorates > Ph.D.) |
|---|---|
| Award Type: | Doctorates > Ph.D. |
| Supervisor(s): | Supervisor(s) Email ORCID Abell, J. S. UNSPECIFIED UNSPECIFIED Crisan, Adrian UNSPECIFIED UNSPECIFIED Mikheenko, P UNSPECIFIED UNSPECIFIED |
| Licence: | |
| College/Faculty: | Colleges > College of Engineering & Physical Sciences |
| School or Department: | School of Metallurgy and Materials |
| Funders: | None/not applicable |
| Subjects: | T Technology > TN Mining engineering. Metallurgy |
| URI: | https://bham-theses.eprints-hosting.org/id/eprint/2930 |
Actions
![]() |
Request a Correction |
![]() |
View Item |
Downloads
Downloads per month over past year
Tools
Tools
