Li, Wei (2011). An investigation into the effect of stress on the formation and stability of carbon s-phase on austenitic stainless steel. University of Birmingham. Ph.D.
Preview |
Li_11_PhD.pdf
Download (13MB) |
Abstract
S-phase can be created in austenitic stainless steels by low-temperature thermochemical treatments, which greatly enhanced their hardness, wear resistance and fatigue properties because of the supersaturation by interstitials. One of the technological challenges associated with S-phase surface engineering is that the maximum layer thickness of the S-phase layers is very thin. The thickness of S-phase is restricted by its metastability and precipitation will occur as a result of prolonged treatment.
In this project, the effect of in situ tensile stress on the formation of carbon S-phase on 316L austenitic stainless steel was investigated and it was demonstrated that the tensile stress thickened the S-phase layer by promoting the carbon diffusion in austenitic substrate. However, metastable carbides precipitated when applied tensile stress exceeded 40MPa.
The thermo-mechanical stability of carbon S-phase was studied by creeping (tensile stress) and HIPping (compressive stress) tests. The results showed that the compressive stress retard the decomposition of S-phase by impeding the carbon diffusion; on the other hand, tensile stress promoted the carbon diffusion.
The residual compressive and shear stresses in carbon S-phase was measured be 2.2 GPa and 132 MPa. The wear behaviour of carbon S-phase was studied by dry and oil lubricated reciprocating wear.
| Type of Work: | Thesis (Doctorates > Ph.D.) |
|---|---|
| Award Type: | Doctorates > Ph.D. |
| Supervisor(s): | Supervisor(s) Email ORCID Dong, Hanshan UNSPECIFIED UNSPECIFIED |
| Licence: | |
| College/Faculty: | Colleges > College of Engineering & Physical Sciences |
| School or Department: | School of Metallurgy and Materials |
| Funders: | Engineering and Physical Sciences Research Council |
| Subjects: | T Technology > TN Mining engineering. Metallurgy |
| URI: | https://bham-theses.eprints-hosting.org/id/eprint/2894 |
Actions
![]() |
Request a Correction |
![]() |
View Item |
Downloads
Downloads per month over past year
Tools
Tools
