Deposition and characterisation of functional ITO thin films

Giusti, Gaël (2011). Deposition and characterisation of functional ITO thin films. University of Birmingham. Ph.D.

[thumbnail of GiustiPhD11_b.pdf]
Preview
GiustiPhD11_b.pdf
PDF
Available under License Creative Commons Attribution No Derivatives.

Download (9MB)

Abstract

Polycrystalline tin-doped indium oxide (ITO) thin films were prepared by Pulsed Laser Deposition (PLD) with an ITO (In\(_2\)O\(_3\)-10 wt.% SnO\(_2\)) target and deposited on borosilicate glass substrates. By changing independently the thickness, the deposition temperature and the oxygen pressure, a variety of microstructures were deposited. The impact on thin film physical properties of different gas dynamics is stressed and explained. Films deposited at room temperature (RT) show poorer opto-electrical properties. The same is true for films deposited at low or high oxygen pressure. It is shown that films grown with 1 to 10 mT Oxygen pressure at 200 °C show the best compromise in terms of transmittance and resistivity. The influence of the thickness, the substrate temperature and the oxygen pressure on the microstructure and ITO film properties is discussed. A practical application (a Dye Sensitized Solar Cell) is proposed.

Type of Work: Thesis (Doctorates > Ph.D.)
Award Type: Doctorates > Ph.D.
Supervisor(s):
Supervisor(s)
Email
ORCID
Abell, J. S.
UNSPECIFIED
UNSPECIFIED
Jones, Ian P.
UNSPECIFIED
UNSPECIFIED
Licence: Creative Commons: Attribution-No Derivative Works 3.0
College/Faculty: Colleges > College of Engineering & Physical Sciences
School or Department: School of Metallurgy and Materials
Funders: Engineering and Physical Sciences Research Council
Subjects: T Technology > T Technology (General)
Q Science > QC Physics
URI: https://bham-theses.eprints-hosting.org/id/eprint/1678

Actions

Request a Correction Request a Correction
View Item View Item

Downloads

Downloads per month over past year